Communicate with Supplier? Supplier
Sun Zhaohai Mr. Sun Zhaohai
What can I do for you?
Contact Supplier

Zibo Yuhai Electronic Ceramic Co., Ltd.

Products

Home > Products > PZT Piezoelectric Elements > Piezoelectric Block & Plates > High Sensitive Piezoceramic Plates 80x80x1mm

High Sensitive Piezoceramic Plates 80x80x1mm

High Sensitive Piezoceramic Plates 80x80x1mm

Basic Info

    Model No.: 80*80*1mm PZT-51

Product Description



Welcome Customized Piezo Ceramic components


Application: Ultrasonic Transducer, ultrasonic acoustics pickups


Features :

Sizes from 1mm up to 180mm

Thickness from 0.2mm up to 25mm

Choice of metallisation (Silver, Nickel, Gold and others on request)

Wide choice of PZT formulations



Piezoelectric ceramic Material: PZT-51 equal to Pzt-5a


Piezoelectric Elements technical data:

Dimensions: length/width 80mm, length/width 80mm, height 1mm

Piezoelectric elements technical data:
Dimensions: length/width 80mm, length/width 80mm, height 1mm
Thickness Frequency Fr: 2MHz ± 5%
Electromechanical coupling coefficient Kp ≥ 0.60
Dielectric Loss tg δ: ≤ 2%
Static capacitance Cs: 11500pF±12.5%

Test Condition: 25±3 °C 40~70% R.H.
fr, Zm, Kr => Radial mode vibration
Cs tanδ => LCR meter at 1KHz 1Vrms





Nominal Sizes and Tolerances

Geometry

Size (mm)

Tolerance

Discs

Diameter: 3 to 200

Tolerance according to the sizes of the piezo elements.

Thickness: 0.2-25

Tubes

Length: 1-100

OD: 6-180

ID: 5-150

Wall: 0.5-15

Plates

Length: 1-200

Width: 1-200

Thickness: 0.2-25

Sphere

OD: 6-160

ID: 4-150

Wall: 1-10

Rings

OD: 3-180

ID: 1-150

Thickness : 0.2-25

For All Sizes

Flatness

± 0.03

Concentricity

± 0.10

Perpendicularity

± 0.10

Parallelism

± 0.05

Nominal Electric Tolerances

Piezoelectric Properties

± 5%

Relative Dielectric Constant

± 15%




Piezo-ceramic materials are categorized as functional ceramics. In sensors they make it possible to convert forces, pressures and accelerations into electrical signals, and in sonic and ultrasonic transducers and actuators they convert electric voltages into vibrations or deformations. Piezo-ceramic materials are classified according to their chemical composition on the one hand, and by the specific application conditions on the other.


Materials for power transducers (ultrasonic applications)

Materials for sensor applications (ultrasonic transmitters and receivers)

Materials for actuating applications (precision positioning or injection systems)



Typical soft PZT characteristics include:

  • Wide range of frequencies in transmit and receive (sub-audible, audible, ultrasonic)
  • High output, low drive material
  • High frequency, fast response time
  • High sensitivity for active or passive use
  • Ability to use with low voltage or high voltage drive circuits
  • Good mechanical and acoustic coupling
  • Wide variety of shapes and sizes that can be customized to meet specific requirements and applications
  • Wide variety of compositions that can be selected to meet specific requirements and applications
  • Quality of each PZT component is ensured by a rigorous testing regimen. Characteristics such as frequency, capacitance, dissipation, coupling, d33 and mechanical properties are measured and verified against our / customer provided specifications.


Yuhai soft PZT piezo materail includes:

P-51

is a modified soft PZT for general purpose. It is dedicated to low aging rate and

extremely stable performance requirement etc. transducers

PliS-51

is a high Curie temperature version of P-51. It is dedicated to low aging rate, extremely stable performance and high frequency requirement etc. transducers

P-52

is a modified soft PZT designed for relative high dielectric constant required

hydrophone etc. receiver transducers

P-53

is developed as high dielectric constant and high Curie point soft PZT particular

useful for receiver transducer and actuator etc. applications

PSnN-5

is a modified soft PZT , high curie temperature, stable performance requirement etc. transducers, special recommendation distance meansurements.

PZT-5H

is a modified soft PZT dedicated for popular used high dielectric constant,

reasonable high Curie point required receiver transducer, ignition and actuator etc. applications



Looking for ideal Piezoelectric Ceramic Plates Ultrasonic Pickups Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Ultrasonic Piezoelectric Plate Element are quality guaranteed. We are China Origin Factory of Soft PZT Ultrasonic Plate. If you have any question, please feel free to contact us.

Product Categories : PZT Piezoelectric Elements > Piezoelectric Block & Plates

Send Inquiry

Sun Zhaohai

Mr. Sun Zhaohai

Email:

ceo@zbyuhai.com

Send Inquiry

Tel:0086-533-4230012

Fax:

Mobile Phone:+8618753397607

Email:ceo@zbyuhai.com

Address:No.57 Chuangye Road, Boshan Economic Development Area, Zibo, Shandong