Zibo Yuhai Electronic Ceramic Co., Ltd.

Products

Home > Products > Piezoelectric Rings For Ultrasonic Machining > High Power Piezo Ceramic Ring OD50xID20x6mm

High Power Piezo Ceramic Ring OD50xID20x6mm

  • $99
    10-9999
    Piece/Pieces
  • $10
    ≥10000
    Piece/Pieces
Min. Order:
1 Piece/Pieces
Share:
  • Product Description
Overview
Product Attributes

Model No.OD50xID20x6mm PZT-82

Packaging & Delivery
Selling Units:
Piece/Pieces

Piezoelectric ceramic ring

Sizes from 3mm up to 180mm

Thickness from 0.2mm up to 25mm

Choice of metallisation (Silver, Nickel, Gold and others on request)

Wide choice of PZT formulations




Piezoelectric Rings OD50*ID20*6mm PZT-82 

 

Applications: High power ultrasonic welding transducer

 

Features : 

 

very higher mechanical quality factor and lower dielectric loss

much higher power handling capability 



Piezoelectric Ceramic Material:  PZT-82


Piezoelectric Elements technical data:
Dimensions:   Outer diameter 50mm, inner diameter 20 thickness 6mm
Radial frequency Fr:  33KHz ± 2KHz
Mechanical Coupling Coefficient K31  ≥0.34
Dielectric Loss tg δ:  ≤ 0.3%
Static capacitance Cs:  2500pF ± 12.5%

Test Condition: 25±3 °C 40~70% R.H.

fr, Zm, Kr => Radial mode vibration
Cs tanδ => LCR meter at 1KHz 1Vrms


Hard PZT

High power or "hard" ceramics can withstand high levels of electrical excitation and mechanical stress. These materials are suited for high voltage or high power generators and transducers.

PZT-4 Series

This material range is ideally suited for ultrasonic cleaning, sonar, and other high power acoustic radiation applications. These materials are designated as PZT-4 series type materials and are capable of producing large mechanical drive amplitudes while maintaining low mechanical and dielectric losses. In addition, it can be used under both constant and repetitive conditions. 

PZT-8 Series

This material range is used in high power applications, even though its piezoelectric activity level is slightly lower than PZT-4 series types. With an extremely high mechanical quality factor and extremely low loss factor, PZT-8 series materials have the ultimate power handling capability. 

P-41

is equal to PZT-4D hard PZT. It is designed for higher dielectric constant, high Q m , high coercive field, high coupling and high stiffness required high power high driving transducers etc.

P-42

Is a modified hard PZT, higher dielectric constant of P-41.

P-43

is a modified hard PZT. It is developed for higher dielectric constant, high

coupling and high stiffness required high power high driving etc. transducers

P-82

Is equal to PZT-8, hard PZT for higher mechanical quality factor, lower dielectric loss required and much higher power handling capability etc. transducers.

PCrN-4

is a modified PZT dedicated for extremely high power high driving etc.

 dual function of receiver and transmiting transducer. 

PbaS-4

is a modified hard PZT developed for extremely high dielectric constant, high Q m ,

high stiffness and low dissipation factor required high frequency transducers etc.




Product Categories : Piezoelectric Rings For Ultrasonic Machining

Email to this supplier
  • *Subject:
  • *To:
    Mr. Sun Zhaohai
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters

Home > Products > Piezoelectric Rings For Ultrasonic Machining > High Power Piezo Ceramic Ring OD50xID20x6mm

Send Inquiry
*
*

Send Inquiry

Sun Zhaohai

Mr. Sun Zhaohai

Tel:0086-533-4230012

Fax:

Mobile Phone:+8618753397607

Email:josa@zbyuhai.com

Address:No.57 Chuangye Road, Boshan Economic Development Area, Zibo, Shandong

Mobile Site

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send